Honda Clone fueled by producer-gas

Conversion of a 6.5hp single cylinder Honda clone engine to producer-gas. Timing was advanced and a carburetor was fabricated. These are affordable engines popular with go-cart racers thus there is a pool of performance techniques easily available to tap.



At Icy Straits Lumber, will a small Gasifier reduce costs in Alaska?

Wes Tyler at Icy Straits Lumber, Tom Miles, and Jim Mason with All Power Labs, Alaska, 2012

In Alaska, there are a lot of remote villages that generate electricity by using small oil generators. But, transport costs and fuel costs have made the electricity very expensive, and the costs of heating their homes and generating electricity has been a burden on the businesses and families in the rural areas.



Gasifier and EngineTables

Gasifier and Engine Tables
Kevin Chisholm, October 11, 2006

Attached is a Spread Sheet "Gasifier and Engine Tables" that should answer a number of questions relating to diesel fuel displaced by using wood gas in a dual fueled engine, or the amount of wood required to provide sufficient gas to run a Spark Ignition (SI) engine of any size.

I put this Spread Sheet together, based on fundamental work done by Doug Williams of Fluidyne, http://www.fluidynenz.gwprojects.org/




Engine Test With Producer Gas

Bench tests with a four-cylinder stationary engine were made with gasoline
and producer gas from charcoal as the fuels. A comparison of their performance
revf'aled that maximum power from producer gas from charcoal is about 55 per-
cent of gasoline power, and that about 11.4 pounds of charcoal is equivalent to
1 gallon of gasoline. When operating an engine on producer gas the spark should
be advanced beyond the setting for maximum power with gasoline.


Subscribe to Engine